Related Links
Setting credentials for a specific device
on page 54
Discovering devices with SiteConfig
Prerequisites for this task are as follows:
•
The Ethernet switch or switches that the support the control network are configured
and operational. If multiple switches, ISLs are connected and trunks configured.
•
The control point PC is communicating on the control network.
•
There are no routers between the control point PC and the devices to be discovered.
•
Devices to be discovered are Windows operating system devices, with SiteConfig
support installed.
•
Devices are cabled for control network connections.
1. Open SiteConfig on the control point PC.
2. In the toolbar, click the discover devices button.
The Discover Devices dialog box opens.
A list of discovered devices is displayed.
3. Click
Rescan
to re-run the discovery mechanism. You can do this if a device that
you want to discover has its network connection restored or otherwise becomes
available. Additional devices discovered are added to the list.
4 October 2010
Aurora Edit Installation Guide
47
Configuring the network