52
Focus 70 Live Highly Affordable HD System Camera User’s Guide (v1.1)
Chapter 4 - Operating instructions
4.12 Managing files
You have access to 15 different files. This number can be extended by using additional scene
files stored on a USB flash drive. The Files menu is used to recall and store these files. There
are three types of file:
•
scene files
•
operator files
•
lens files
A scene file contains values related to the picture performance. The operator file contains
values related to the setup of the camera (viewfinder and configuration parameters). Lens files
contain lens related settings.
The tables in
“Camera menu reference” on page 75
and further indicate the functions that are
stored in the scene file, functions that are stored in an operator file and those that are stored in
a lens file.
4.12.1 Scene files
Four scene files are stored in the camera itself (SCAM1,SCAM2, SCAM3 and SCAM4) while
more scene files can be stored on a USB flash drive. A Standard scene file (preselected as
either factory or customer defined) is stored in the camera.
☞
Note
☞
Note
The standard Customer Scene file is stored via the
SECURITY
menu, not the
FILES
menu.
The decision to use the factory defined file or the customer defined file as the standard file is
also made in this menu.
The
FILES
menu enables the scene files to be stored and recalled using the store and recall
entries of the menu system. If the message
NOK
is displayed, the old values are restored.
☞
Note
☞
Note
If the camera is on air and a scene file is recalled, the recalled values do not become active
until the camera goes off air.
4.12.2 Operator files
Four operator files are stored in the camera itself (OCam1,OCam2, OCam3 and OCam4) while
more operator files can be stored on a USB flash drive. These files contain information for
setting up the non-video configuration of the camera. A STANDARD operator file (factory or
customer defined) is stored in the camera.
☞
Note
☞
Note
The standard Customer operator file is stored via the
SECURITY
menu, not the
FILES
menu.
The decision to use the factory defined file or the customer defined file as the standard file is
also made in this menu.
Summary of Contents for Focus 70 Live
