72
Focus 70 Live Highly Affordable HD System Camera User’s Guide (v1.1)
Chapter 5 - Video setup
Auto Skin Detail
Carry out the Auto Skin Detail procedure as follows:
1.
In the camera menu, navigate to the
CREATIVE
CONTROL
>
SHARPNESS
>
SKIN
DETAIL
and use the
SKIN
GATE
item to select 1, 2 or 3 (and not any of the combined options).
2.
Place the cursor in front of the
AUTO
SKIN
DTL
function.
3.
Press the
select
button on the front of the camera. The following appears in the
viewfinder:
4.
Now point the two small black boxes at the intended surface (generally a face).
5.
Press the
select
button again to start the measurement procedure (the iris is automatically
set to
auto
by the camera). The process running message appears:
6.
When the process is completed (within a few seconds) the OK message appears in the
viewfinder:
7.
Now adjust the Skin Detail level with the
SKIN
LEVEL
item. Decrease the value below 50
to soften the selected area. Increase the value above 50 to add extra detail.
ASKIN: window
ASKIN: running
ASKIN: OK
Summary of Contents for Focus 70 Live
