Stop verifying RDR virtual disk
Verification of RDR virtual disk in progress can be stopped with the procedure below:
1. Start the RDR Utility and right-click
RDR Virtual Disk x
in the left pane and click
Stop Verify RDR
Virtual Disk
.
2. In the
Stop Verify RDR Virtual Disk
dialog box, click
OK
.
Set resync priority
The priority of synchronization by RDR can be specified. By changing the priority, the I/O load
during synchronization can be reduced using the following steps:
1. Start the RDR Utility and right-click on
RDR Virtual Disk x
in the left pane then click
Set Resync
Priority
.
2. When a dialog box appears, select
Low
,
Normal
, or
High
(the default is
Normal
) and click
OK
.
3. In the
Set Resync Priority
dialog box, click
OK
.
Set LUN load balancing
Load balancing can be specified as on or off.
When the load balancing is on (default), the read process is performed alternately from two physical
disks forming the RDR Virtual Disk to improve performance. When it is off, the read process is
performed from the physical disk specified as Active RDR Plex. To set the load balancing on or
off, use the following procedure.
1. Start the RDR Utility, right-click on
RDR Virtual Disk x
in the left pane to change the priority and
click
Set RDR LUN Load Balancing
.
2. When a dialog box appears, select
On
or
Off
(the default is
On
) and click
OK
.
3. In the
Set RDR LUN Load Balancing
dialog box, click
OK
.
Build dynamic disk
Use Windows utilities and build a Dynamic disk with all the disks except for drive 0.
1. From the Windows desktop, right-click
My Computer
and select
Manage
.
2. Change the CD ROM drive letter to
F:\
.
3. Select
Disk Management
.
4. Right-click on one of the unallocated
Disk 1
.
5. Select
New Striped Volume
.
6. Click
Next
.
7. Add disk
2
–
4
to the group in the Selected column.
8. Click
Next
.
9. Assign drive letter
D
.
10. Set file system to
NTFS
.
52
FT Server Instruction Manual
20131220
Configuring the FT Server
Summary of Contents for FT
