26
Power on the DMR 1000
Once you have plugged in an AC power cord or DC power supply, you can power on the DMR.
The Power button is located on the left-hand side of the front panel, beneath the handle.
Navigating the DMR 1000
There are several ways to navigate the DMR:
“Using the front panel buttons”
The soft buttons on the touch screen
Use these to configure the DMR, load a clip, edit a playlist, etc.
To go back a step, use either the soft Back button on the
touchscreen or the hard Back button on the front panel.
The hard buttons below the touch screen
Use these to control playing and recording a clip
The hard buttons next to the touch screen
Use these to toggle from the main settings screen and the
monitor, perform custom tasks, or set in and out points for clips.
Jog/Shuttle/Var knob
Use this knob, with the JOG, SHTL, and VAR buttons, to move
through a clip or the clip menu.
3
IN
OUT
BACK
CF1
CF2
4