30
Sample HD configuration
If a configuration setting is not specified, you may leave it at the default setting
Setting
Path
Value
Audio input
Set on the back of the DMR
Line (See
Audio
channels
Audio | channels | channel <1-4>
SDI or AES 1-4 (set all 4 channels)
Video
standard
a
a. Make sure to eject any loaded clip before setting the video standard. If the DMR is playing, recording, or has a clip loaded,
the video standard setting is unavailable.
Setup | formats | video standard
Select one of the following:
720p50
1080i50
720p59
1080i59
Video source
Setup | formats | video source
SDI
Video
compression
Setup | formats | video compression HD
Select one of the following:
JP2K50
JP2K75
JP2K100
MPEG2
b
b. Available with the DMR 1000-MPEG model.
Media
selection
Setup | formats | media selection
Specify REV, one of the CF disk drives, or an external
source
Run mode
Setup | Timecode | run mode
Free-run
Play mode
Setup | Timecode | play mode
From file
Input type
Setup | Timecode | setup | input type
DVITC
Drop frame (if
NTSC)
Setup | Timecode |Setup | dropframe
DF
F-run sync
Setup | Timecode |setup | f-run sync
External
DVITC
Setup | Timecode | setup | DVITC
14
ATC HD
(ignore if
using SD)
Setup | Timecode | setup ATC HD
9