32
Ejecting a CompactFlash card
To eject a CompactFlash card:
1. To eject the card, push the eject button at the right side.
NOTE: Use only high-speed CompactFlash cards and ensure the cards are fast enough
for the chosen recording compression profile.
Recording a clip
Before you record a clip, you need to configure the DMR 1000. A complete list of
configuration settings begins on
.
There are two sample configurations starting on
•
“Sample Analog SD configuration”
•
Make sure to eject any current clip before pressing the Record button.
To record a clip:
1. Insert the media.
2. Press the Record button.
About the recording buffer
The built-in recording buffer enables the DMR to continue recording even when the
media is temporarily inaccessible, for example due to heavy shocks. When the DMR
runs out of storage capacity on the selected media during a recording, it automatically
switches over to another media, if available. Select the preferred media order, or disable
the function, by selecting
Setup | RecBuff | Preferred Media
from the Main menu.
• If no media has been loaded, the DMR records to an internal buffer for a few seconds.
When you insert a media disk, the DMR automatically records the buffered material
to the disk.
• You can press the Record button before any input has been selected; the DMR will
record, for a few seconds, black or colorbars depending on how you have configured
the system.
