GUIDE TO INSTALLATION AND OPERATION
IPG-4901 |
11
Gateway-to-ETH port associations:
OUT
Gateways
IN
Gateways
ETH Port
1-5
10-14
ETH1
6-9
15-18
ETH2
NOTE – a Gateway must be ENABLED in the
before it can be controlled from the iControl
interface. See page 34 for instructions.
4.2.2 Gateway Config window
This window shows the current configuration and status of all gateways on the card, and provides controls to modify
their settings.
Figure 4-3
Gateway Config table