manualshive.com logo in svg

GRASS VALLEY K2 BASECAMP EXPRESS, Instruction Manual

"Upgrade Instructions and user manual for the GRASS VALLEY K2 BASECAMP EXPRESS are now available for free download at our website. Discover step-by-step guidance and essential information to enhance your product experience. Simply visit 88.208.23.73:8080 to access these valuable resources and optimize the functionality of your K2 BASECAMP EXPRESS."

Share
Download
background image

328

K2 Storage System Instruction Manual

July 3, 2007

Chapter 11   Administering and maintaining the K2 Storage System

To remove a K2 Storage System from the K2 System Configuration application, do 
the following:

1. In the tree view, select the name of the K2 Storage System, which is the top node 

of the storage system tree.

2. Click 

Remove

. The storage system is removed from the tree view.

Accessing a K2 Storage System from multiple PCs

It is recommended that you install the K2 System Configuration application on one 
PC only in your facility. This eliminates potential problems in the installation, 
configuration, and maintenance of your K2 Storage System.

However, if necessary you can install and run the K2 System Configuration 
application on multiple PCs in your facility. The rule for multiple access is that the 
first instance of the K2 System Configuration application to access a K2 Storage 
System in essence “locks out” any other instances. It is therefore recommended that 
you constrain your use of the application from multiple PCs as follows:

• Designate a control point PC as the configuration PC and then configure the K2 

Storage System or device from that PC only. 

• On the other control point PCs, limit operations to view-only when accessing the 

K2 Storage System. You can select nodes in the tree view to view devices, roles, 
and subsystems. However, do not click any buttons except the “Check” buttons that 
appear on property pages. 

To access a K2 Storage System from multiple control point PCs, do the following:

1. Install Control Point software on the designated K2 System Configuration control 

point PC and complete the initial system configuration. Close the K2 System 
Configuration application on that PC.

2. Install Control Point software on another control point PC and open the K2 System 

Configuration application.

3. Select 

Retrieve Configuration

 and enter the name or IP address of the K2 Media 

Server for the K2 Storage System. If the K2 Storage System has multiple K2 Media 
Servers, you must enter the name or IP address of the server configured first, which 
is designated as server 1, server A, or server 1A, depending on the level of the 
system.

If there is another instance of the K2 System Configuration application on a 
different control point PC currently accessing the K2 Storage System, a message 
informs you of this and you are not allowed to access the system.

If access is allowed, a Retrieving Configuration message box shows progress. It 
can take over 30 seconds to retrieve the configuration. When the configuration is 
retrieved, the K2 Storage System appears in the tree view. Make sure that you only 
attempt view-only operations from this PC. Do not configure the K2 Storage 
System from this PC.

4. Repeat the previous steps for other control point PCs from which you need access 

to the K2 Storage System.

Summary of Contents for K2 BASECAMP EXPRESS











































































































































































































































































































































































































Reviews:

No comments

Related manuals for K2 BASECAMP EXPRESS

IBM 3420 Reference Manual preview
3420
Brand: IBM Pages: 206
LaCie LaCie Ethernet Big Disk Quick Install Manual preview
LaCie Ethernet Big Disk
Brand: LaCie Pages: 16
LaCie 4BIG QUADRA USB 3.0 User Manual preview
4BIG QUADRA USB 3.0
Brand: LaCie Pages: 41
LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
LaCie Hard Drive Quick Install Manual preview
Hard Drive
Brand: LaCie Pages: 13
LaCie D2 BLU-RAY XL Manual preview
D2 BLU-RAY XL
Brand: LaCie Pages: 29
LaCie D2 BLU-RAY XL Brochure & Specs preview
D2 BLU-RAY XL
Brand: LaCie Pages: 4
Qcells Q.HOME+ESS HYB-G2 Installation Training preview
Q.HOME+ESS HYB-G2
Brand: Qcells Pages: 26
Qlogic iSR6200 Quick Start Manual preview
iSR6200
Brand: Qlogic Pages: 20
National Instruments 8260 User Manual preview
8260
Brand: National Instruments Pages: 5
LaCie grand Hard Disk Datasheet preview
grand Hard Disk
Brand: LaCie Pages: 2
iXsystems TrueNAS R Series Basic Setup Manual preview
TrueNAS R Series
Brand: iXsystems Pages: 24
Transcend StoreJet 35T User Manual preview
StoreJet 35T
Brand: Transcend Pages: 24
LaCie 301200U User Manual preview
301200U
Brand: LaCie Pages: 48
NETGEAR ReadyNAS 3220 Series Datasheet preview
ReadyNAS 3220 Series
Brand: NETGEAR Pages: 4
Oki 70043502 Installation Instructions Manual preview
70043502
Brand: Oki Pages: 16
USP DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116 Owner'S Manual preview
DURAMAX Apex Pro 10.5 Ft x 8 Ft 40116
Brand: USP Pages: 79

Brands by name

Popular brands

Load more brands