Important information
xii
Precautions
To ensure continual high performance from the camera take the following
precautions into consideration:
•
Avoid very damp places. If the environment is wet or damp a rain cover must be
used to protect the unit.
•
Do not subject the unit to severe shocks or vibration.
•
Do not expose the camera to extremes of temperature.
•
Do not leave the unit in direct sunlight or close to heating appliances for
extended periods.
•
Do not allow sunlight to shine into the viewfinder.
•
Do not allow LASER beams to shine into the lens as this could damage the CCD
sensors.
•
Avoid extreme highlights as these can cause various kinds of optical reflections.
•
Be careful when connecting and disconnecting triax cables.
-
Do not mix triax units from different types of camera systems (HD with SD,
RGB triax with digital triax).
-
Make connections swiftly and firmly to avoid false error messages.
•
In fibre optic cable systems always put the dust caps on cable and panel
connectors immediately after disconnecting a cable. Keep the dust caps clean.
