manualshive.com logo in svg

GRASS VALLEY PROFILE XP PVS Series, System Manual

The GRASS VALLEY PROFILE XP PVS Series is a high-performance broadcast production server. Enhance your workflow with this versatile system, equipped with advanced features for seamless content playback and production. To maximize its capabilities, make sure to download the free System Manual from our website to unlock its full potential.

Share
Download
background image

2

 

23 July 2004

Copyright

Copyright © 2004 Thomson Broadcast and Media Solutions, Inc. All rights reserved. Printed in
the United States of America.

This document may not be copied in whole or in part, or otherwise reproduced except as
specifically permitted under U.S. copyright law, without the prior written consent of Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900 

Trademarks

Grass Valley, Profile, and Profile XP are either registered trademarks or trademarks of
Thomson Broadcast and Media Solutions, Inc. in the United States and/or other countries.
Other trademarks used in this document are either registered trademarks or trademarks of the
manufacturers or vendors of the associated products. Thomson Broadcast and Media
Solutions, Inc. products are covered by U.S. and foreign patents, issued and pending.
Additional information regarding Thomson Broadcast and Media Solutions, Inc. trademarks
and other proprietary rights may be found at www.thomsongrassvalley.com.

Disclaimer

Product options and specifications subject to change without notice. The information in this
manual is furnished for informational use only, is subject to change without notice, and should
not be construed as a commitment by Thomson Broadcast and Media Solutions, Inc. Thomson
Broadcast and Media Solutions, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this publication.

U.S. Government 
Restricted Rights 
Legend

Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer
Software Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900
U.S.A.

Revision Status

Rev Date 

Description

December 1, 1999

Initial release of the Profile XP System Guide 071-0624-00A

December 6, 1999

Updated to include version 4.0.1 features 071-0624-01

July 21, 2000

Updated for high definition features in v. 4.1 — 071-8048-00

November 17, 
2000

Updated to include support for 73 GB RAID drives — 071-8048-01

January 17, 2001

Supports new system processor board connections. 071-8048-02

July 13, 2001

Updated to support version 5.0. 071-8112-00

June 17, 2002

Updated to include additional RAID systems and new disk utility. 
071-8112-01

September 19, 
2002

Updated to support version 5.1 Profile XP system software release. 
071-8194-00

July 21, 2003

Updated to support version 5.2 Profile XP system software release. 
071-8248-00

February 23, 2004

Updated to support version 5.4 Profile XP system software release, 
PVS3000, PVS 3500, Long GoP on Video Processor board, new 
Fibre Channel Disk II board, Agile Output option, PFR 600 and 
PFR700 Fibre Channel RAID storage. 071-8289-00

23 July 2004

New video standard procedures.

Summary of Contents for PROFILE XP PVS Series

































































































































































































































































































































































Reviews:

No comments

Related manuals for PROFILE XP PVS Series

Barco MatrixPRO-II DVI 16x16 User Manual preview
MatrixPRO-II DVI 16x16
Brand: Barco Pages: 43
Barco matrixpro-II Information Manual preview
matrixpro-II
Brand: Barco Pages: 5
CAME QBEMFSB2 User Manual preview
QBEMFSB2
Brand: CAME Pages: 19
Watchguard XTM 5 Series Hardware Manual preview
XTM 5 Series
Brand: Watchguard Pages: 24
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Brand: Javad Pages: 35
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
Abocom PLS342 Specification Sheet preview
PLS342
Brand: Abocom Pages: 2
National Instruments NI-9206 Getting Started preview
NI-9206
Brand: National Instruments Pages: 8
ANEP P4GU VoLTE Technical Data Sheet preview
P4GU VoLTE
Brand: ANEP Pages: 48
IEI Technology PulM-1G4T-I211 Quick Installation Manual preview
PulM-1G4T-I211
Brand: IEI Technology Pages: 2
Xantech CC62 Installation Instructions preview
CC62
Brand: Xantech Pages: 5
AIC SB302-LB User Manual preview
SB302-LB
Brand: AIC Pages: 101
Starbridge Networks ADSL Ethernet & USB Combo Router Lynx L-510 User Manual preview
ADSL Ethernet & USB Combo Router Lynx L-510
Brand: Starbridge Networks Pages: 59
Avigilon NVR5-STD-10GBE Installation Manual preview
NVR5-STD-10GBE
Brand: Avigilon Pages: 12
Extreme Networks ExtremeCloud Appliance E1120 User Manual preview
ExtremeCloud Appliance E1120
Brand: Extreme Networks Pages: 219
QNAP TS 73A Series User Manual preview
TS 73A Series
Brand: QNAP Pages: 68
Lantech TWAP-5006 User Manual preview
TWAP-5006
Brand: Lantech Pages: 20
socomec ATyS g M 2P Instruction Manual preview
ATyS g M 2P
Brand: socomec Pages: 54

Brands by name

Popular brands

Load more brands