226
Turbo iDDR User Guide
06 July 2005
Chapter 4 Operation: AppCenter Workstation
Using the copy and paste commands
1. Select the asset(s) in the
asset list
.
2. Copy the asset to the clipboard using one of the following:
• Select
Copy
in the
asset context menu
, or
• Select
Edit
in the AppCenter toolbar, then choose
Copy
.
• Use the keyboard shortcut
Ctrl + C
.
3. If needed, change the current bin to the target bin. (Refer to
“Changing current bin
using 'Look in' drop-down list.” on page 221
.)
4. Paste the asset(s) from the clipboard to the current bin.
The Paste operation is accessed in the same way as Copy.
NOTE: If an asset is locked or in use, it remains in the existing bin, while the
remaining assets are moved to a new bin with the specified name.
Using Send To
1. Select the asset(s) in the
Asset List
.
2. To open the Send To dialog box using do one of following:
• Select
Clips | Send To
, or
• Select
Send To
in the
asset context menu
, or
• Select the
Send To
button in the Clips Pane.
If the Send To button is not displayed in the Clips Pane, refer to
assignable
buttons
in
“Guide to using the Clips Pane” on page 214
.
The Send dialog box appears.
3. In the Send dialog box, click
Bin
, then
Copy
to
in the left-hand drop-list.
4. Select the target bin name.
Summary of Contents for Turbo
