100
Essence Processing SDC
Logging - Network - 1G
LAN_PORT
_
3
_
IPADDRESS=
Logs the Ethernet port IP address.
LAN_PORT
_
3
_
GATEWAY=
Logs the network gateway IP address.
LAN_PORT
_
3
_
SUBNET_MASK=
Logs the IP network’s subnet mask.
LAN_PORT
_
3
_
MACADDRESS=
Logs the Ethernet port MAC address.
LAN_PORT
_
3
_
STATE=
Logs the Ethernet connection state. Valid values
are:
•
Active
•
WARN:Inactive
LAN_PORT
_
3
_
TRAFFIC_IN=
Logs speed of traffic received by the Ethernet port.
Values are reported in kbps, Mbps or Gbps, as
appropriate.
LAN_PORT
_
3
_
TRAFFIC_OUT=
Logs speed of traffic transmitted by the Ethernet
port.
Values are reported in Kbps, Mbps or Gbps, as
appropriate.
LAN_PORT
_
3
_
CPU_TRAF_IN_STATE= Logs whether the flow of data into the CPU is
satisfactory. Valid values are:
•
OK
•
WARN:LOW DATA
•
FAIL
LAN_PORT
_
3
_
CPU_TRAF_OUT_STAT
E=
Logs whether the flow of data out of the CPU is
satisfactory. Valid values are:
•
OK
•
WARN:LOW DATA
•
FAIL
LAN_PORT_3_LINK_STATE=
Logs the Ethernet link state. Valid values are:
•
OK
•
WARN:DOWN
Parameter
Description
Summary of Contents for UCP-3901
