157
UCP
-
3901
Multiviewer SDC
Chapter
User Manual
Card Firmware /
Software Version
Each software version contains multiple firmware images. These allow
different spigot input/output and flow standard combinations to be
selected.
For an Multiviewer SDC, the firmware configures the UCP
-
3901 Card
inputs and outputs.
Note:
Selecting a firmware version is
not
normally required for
Multiviewer SDC.
Note
:
Restore
and
Restart
buttons are displayed only when an item
not currently installed is selected.
Click
Restart
to restart the card and implement any changes made.
See
, on page 183 for how
to change the SDC application.
Installed 25G /
50G Licensed
Options
Shows the currently installed licensed card options. See See
on page 188 for how to install a license.
Parameter
Description
Summary of Contents for UCP-3901
