196
Maintenance & Troubleshooting
Cooling Fan Replacement Procedure
3 Using needle-nose pliers, compress the two pushpins so that they unlatch. Push the pin
through the card to release it from the assembly.
4 Flip the card back to the component (fan) side. Insert the pliers under the one of the
pushpin heads. Press down on the center of the fan assembly to prevent it from
flipping on its side and gently pry the pin from the heatsink assembly. Repeat for the
second pushpin.
5 Using curved tweezers, disconnect the fan power connector plug, very carefully; gently
wiggle the connector plug from the socket (jack). Do not pull on the wires. If the wires
Summary of Contents for UCP-3901
