37
4
Connecting to the Card’s Configuration
Interface
Installing RollCall
Use RollCall to configure the UCP
-
3901 Card. To install RollCall on your PC, see the
RollCall
V4 Suite & RollCall Lite Installation Guide
. See
For help with general use of the RollCall application, open the user manual by clicking the
button on the main RollCall toolbar.
IP Address and Network Port Usage
Use the Densité frame’s control panel to view and set the UCP
-
3901’s current IP address that
you use in RollCall to connect to it. See
Local control using the Densité frame control panel
to set the Card’s IP Addresses
Once you have connected to the card with RollCall, you can change the card’s IP
configuration through RollCall; see
, on page 117 and
on page 62.
Certain ports must be open on the management network. This information can be found
under
Port Usage
in the
RollCall V4 Suite & RollCall Lite Installation Guide
Connecting to the UCP
-
3901 Card with RollCall
First Time Connection to the UCP
-
3901 Card with RollCall
Connect to the UCP
-
3901 Card with RollCall. The connection is made to the card’s
MANAGEMENT Ethernet interface. To set the IP address of the card’s Ethernet interfaces, see
Local control using the Densité frame control panel to set the Card’s IP Addresses
page 29.
The generic UCP
-
3901 Card is supplied with software which contains each of the available
Software Defined Cores (SDC),
unlicensed
. By default, a new UCP
-
3901 Card starts up with
Connect with RollCall
on Configuration Port
Software Defined Core
Description
Multiviewer Essence Processing
2050 (default)
Basic UCP
-
3901 Card
configuration / network
connectivity
2051
Multiviewer SDC
configuration
Summary of Contents for UCP-3901
