258
Zodiak Installation and Service Manual
Appendix C — External Interfaces
tions then is lost to the secondary control system, the Zodiak system will
attempt to reestablish communications with the primary router control
system.
Eng Setup Source Menu
The Eng Setup Source menu is used to define routed Zodiak sources, which
includes specifying which router destination will be associated with each
switcher source. Press the
Eng Setup
Menu panel button, then touch the
Source Definition
category selection button, to go to this menu (
Figure 173. Eng Setup Source Definition Menu
1.
Select the Zodiak source to be configured with the router on the
scrolling Source list.
2.
Touch the Video Input data pad and enter the number of the Zodiak
input that will be used with the router video destination.
3.
If the routed source will have an associated key signal, touch the
appropriate Key Input button, then touch the Key Input data pad and
enter the number of the Zodiak input that will be used with the router
key signal destination.
Note
If you assign a key input, the router system needs to be configured to switch
that key destination along with the video destination. Router levels can be
used to accomplish this.
