Zodiak Installation and Service Manual
37
Main Panel Installation
CAUTION
The Main panel weighs approximately 36 kg (79 lb). Prior to installation,
ensure that your console is structurally capable of supporting the Main panel.
Ventilation
Panel ventilation is accomplished by two fans located on the back of the
power supplies which draw air into the panel, around the buttons, and
expels it out the back. Blocking the front slots of the panel in a flush mount
installation does not constrict ventilation.
Dimensions and Connector Layout
The Main panel was designed to be flush mounted in a console, but it may
also be surface mounted.
provides installation details for both
flush mount and surface mount installations.
provide panel dimensions and connector
layout.
Figure 13. Main Panel Mounting Options (Front Left View)
WARNING
The Main panel lid is held in the open position by two gas shock assem-
blies. The ability of these devices to support the lid is compromised if the
installed panel tilts toward the user at an angle greater than 15 degrees.
Flush Mount
Console to tub Clearance
0.49 in. / 12 mm
Console
.8125 in. / 21 mm
(typical)
Panel Tub
Panel Lid
Support Member
8096_00_23_r0
Mounting Flange
0.43 in. / 11 mm
Panel Tub
Panel Lid
Support Member
Surface Mount
1.03 in. / 26 mm
Mounting Option
Cutout Dimensions
A
1
1
Console Surface Cutout
B
1
C
2
2
Distance between flush mount support members.
Flush Mount
19.00 in.
(483 mm)
42.19 in.
(1072 mm)
41.16 in.
(1045 mm)
Surface Mount
18.38 in.
(467 mm)
41.16 in.
(1045 mm)
n/a
B
C
A
