Zodiak Installation and Service Manual
91
Setting IP Addresses
Figure 60. Effects Memory Subpanel in Configuration Mode
This will bring up the IP Addressing function in the M/E 2 E-MEM sub-
panel. The E-MEM readout display will now appear as shown in
Figure 61. Main Panel IP Addressing Function
5.
Press the
Run
button under
Next IP
(
address entry, MAIN_PNL_IP
.
The value of this IP address will appear
in the readout display of the Master E-MEM subpanel in the lower right
corner of the Main panel (
). This is the currently assigned IP
Address of the Main panel on the Panel LAN.
6.
To change this value, use the Master E-MEM keypad (
enter the desired address. You can use the
Reverse
button to backspace
if you make a mistake, or scroll with
Next
(
Run
button) through the rest
of the IP address selections until you reach MAIN_PNL_IP again.
Undo
Learn
Lock
Bank
1
2
3
4
5
6
7
8
9
0
Run
Seq
Bank
0
Effects
Dis
Bank
1
Tran
Rate
Enter
E-MEM
IP Calib Exit
M/E 2 E-MEM
Subpanel
Master E-MEM
Subpanel
M/E 1 E-MEM
Subpanel
Readout Display
8125_00_13_r0
Undo
Learn
Lock
Bank
1
2
3
4
5
6
7
8
9
0
Run
Seq
Bank
0
Effects
Dis
Bank
1
Tran
Rate
Enter
E-MEM
Exit Save NextIP
8125_00_15_r0
