93
EN
1.
Press the
Menu
button.
2.
Select
Program
and confirm with
OK
.
3.
Select
New
and confirm with
OK
.
ð
The number of available program memory slots is displayed briefly (PXXX).
The number of available switching program memory slots is displayed briefly (dXXX).
4.
In menu item
With Date?
, specify whether the switching program is to be programmed with a date
(
Ä
Chapter “Date-dependent/date-independent programming” on page 85).
5.
Select the
Pulse
function and confirm with
OK
.
6.
Enter the hours and minutes for the switching time (+/-) and confirm with
OK
.
7.
Enter hour(s), minute(s) and second(s) of the pulse duration (+/-) and confirm with
OK
.
8.
Set the day(s) of the week (
⋀
/
⋁
) on which the switching time should apply, and confirm with
OK
.
The days of the week 1 – 5, 6 – 7 and 1 – 7 are set by default. Individual days of the week
can be set (+/-) under menu item “Select days”.
9.
To create a new switching time, select
YES
and confirm with
OK
.
10. Adopt the automatically suggested priority and confirm with
OK
or adjust the priority.
You can only select a priority in advanced mode (
