97
EN
PROGRAMMING RANDOM SWITCHING
Random switching is only possible for certain variants.
Fig. 28: Programming random switching
Random programming is only possible in advanced mode (
Ä
Chapter “Selecting the mode” on
Example
The channel is switched on at random at 6:30 a.m. with an offset of ± 30 minutes, Monday to Friday.
1.
Press the
Menu
button.
2.
Select program and confirm with
OK
.
3.
Select new and confirm with
OK
.
ð
The number of available program memory slots is displayed briefly (PXXX).
The number of available switching program memory slots is displayed briefly (dXXX).
4.
In menu item
With Date?
, specify whether the switching program is to be programmed with a date
(
Ä
Chapter “Date-dependent/date-independent programming” on page 85).
5.
Select the
Random ON
or
Random OFF
function and confirm with
OK
.
You can define an offset of up to ± 2 hours.
Time
6:00
Hours
OK
Time
6:30
Minutes
OK
Offset
0:00
Hours
OK
Offset
0:30
Minutes
OK
Days
12345--
Mon – Fri
OK
Add
switching time?
Yes/No
OK
Priority
Very low…
OK
Program
Menu
OK
New
OK
With Date?
Yes/No
OK
Select FNC
Random ON/OFF
OK
