24 / 110
Power over Ethernet
If the LAN Ethernet switcher support POE (Power over Ethernet), it could power up the Base-unit instead of using
the external power adapter. (WU-10 LAN2 Port is support POE.)
4.4
Video Connection
1.
Connect the
HDMI Output
of base unit to a 4K or Full-HD display by a HDMI cable.
2.
Connect the power adapter to the base unit
DC power socket
and connect the other side plug to an
available electrical outlet and switch the base unit on.
3.
After started, the system show the
home page
, as shown below.
4.5
Audio Connection
WirelessMedia transmitter can transmit the audio output of the PC/Lap-top, re-direct and send to the Base Unit
together with the video signal. The audio will be output at line levels from mini jack socket 3.5mm connector and
via the HDMI output connectors simultaneously.
It’s up to the user to decide whether or not to send the audio signal together with the video signal.
Audio via HDMI output
When your display/projector is connected via HDMI and it support audio together with video, then a separate
audio connection is not necessary. The audio signal is sent together with the video signal to the display. The
system is shown as below.