29 / 110
5.1.1 Enable portable hotspot:
Check the ID and PASS (Password) are shown on the Homepage, as shown below.
5.1.2
Enable LAN connection:
Be sure the WU-10 is connected to the Network. When
Local IP
shows an active IP address, such like
192.168.3.29, it indicates WU-10 is successfully connected to the LAN and get an appointed IP address.
Note:
When it shows “N/A”, means the WU-10 is not connected to the LAN (Local Area Network) by CAT cable
or it failed to get an available IP address by the corporation router.
Please refer to the LAN-settings in Ethernet, as below.
Default password for entering the Main menu on webserver console is “admin”.