55 / 110
Only "a-z","A-Z","0-9","-_" and space are legal character.
Click “Next step”. The following three connection methods are available:
6.1.1.2 Wireless Direct Mode
After Factory Reset, WU-10 base unit starts up in the
default Stand-Alone “Wireless direct mode”
configuration, where the Base-unit creates its own wireless access point, which all transmitters use to connect.
This is typical for a quick setup for small group meetings. The Wi-Fi icon
for the “Wireless direct mode” is
displayed in top status-bar of Home screen.
Guest
connect to the access-point of WU-10, while
Staff
can also
connect to Base-unit via Wi-Fi or via LAN connection to their corporate network.
Stand-Alone Connection
The internal Wi-Fi access Point of WU-10 is active
. The dongle is paired directly to it. Guest and Staff use
the internal Wi-Fi access point of Base-unit to present with all their units.
No Internet access is required.
The LAN-Port of Base-unit is not connected. The PC-users can present with or without dongle by WirelessMedia
