Code 49
Code 49
Auxiliary
switch
Auxiliary
switch
Program-automatic-,
Trim
switch
Autorot.-switch,
Marker
key,
INC-, DEC-Switch
Trim-, PROFI trim-, INC-, DEC-Switch
Progr.autom. Schalter 1
Progr.autom. Schalter 2
Progr.autom. global
Trimmschalter global
Trimm QR links
Trimm QR rechts
Trimm HR tief
Trimm HR hoch
Trimm SR links
Trimm SR rechts
I N C (+) Schalter
DEC ( - ) Schalter
The flight phase switches are now found in the new
Code 52 »
Phase assignment
«.
de are the trim-switches.
The trim can be adjusted for the relevant function
A new addition in this Co
with a switch – or key command.
Both switches “
INC (+)
“ and “
DEC (-)
“ will work
parallel with the rotary control.
Trim switches:
As an alternative for the trim levers of aileron,
elevator and rudder, digital trim is possible with this
function. Preferably you install for each function a 2
position momentary switch Part-Nr.
4160.44.
The
switches for aileron and rudder should be installed
in the transmitter with the functional direction the
ame as the gimbal sticks (left to right).
s
The actual trim increment size for aileron elevator
and rudder depends on the in Code 31 »
Stick
mode
« selected trim reduction (12 steps) . The trim
reduction automatically reduces the trim increments
from 1% increment for 100% trim reduction to
approx.0.25% trim for trim reduction below 25%.
in
The trim adjustment is memorised and indicated
the flight phase dependant Code 53 »
Phase trim
«.
With a switch in the line “
Trim switch global
“ the
trim switches can be activated or de-activated.
Hint:
If you include the trim during programming of free
mixers is the digital trim naturally also in the relevant
ixer output active.
m
INC (+) and DEC (-):
The change of parameter values during flight with
the rotary control can be difficult as you have to
move your hand away from the control stick.
All arameter values, Servo adjustments or the
change of pages in the menus
which you would normally do
ly you nominate to each of the “
INC
“ and
“
DEC
“ command one switching direction of a 2
position momentary switch(Part-Nr.
4160.44
) or a
3-function-gimbal stick switch (Part-Nr.
4143
).
with the rotary selector, can now
be done with the switches.
With every activation of the switch is the value either
increased (
INC
) or decreased (
DEC
).
Preferab
Autorotation
Autorotation K1 Pos.
0%
Markierungstaster
Trimmschalter global
Trimm Roll links
Trimm Roll rechts
Trimm Nick vor
Trimm N
Trimm Heckr. links
ick zurück
Trimm Heckr. rechts
Profitrimm global
INC (+) Schalter
DEC (-) Schalter
h the trim reduction in
The trim increment size for ROLL, PITCH and TAIL
s automatically reduced wit
i
(Code 31). Both new switches the “
INC (+)
“ and
“
DEC (-)
“ will work parallel to the rotary selector.
he former flight phase switches – except for the
T
autorotation phase – are now contained in the new
menu (Code 52) – see further below.
Trim switches:
New in the heli-program is the automatic increment
hange for th
c
e trim switches in relation to the in
n.
5%
%.
pendant Code 53 »
Phase trim
«.
Code 31 »
Stick mode
« selected trim reductio
uced from 1%
In 12 steps can here the trim be red
increments at 100% trin reduction to 0.2
5
increments for trim reductions below 2
The trim adjustment is memorised and indicated in
the flight phase de
oder
new functions
20
Summary of Contents for 4831.660
Page 41: ...Programming examples 43 ...
Page 42: ...Personal notes 44 ...
