GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! No liability for printing errors. We reserve the right to introduce modifications. Sous réserve de modifications! Nous ne sommes pas responsables
d’éventuelles erreurs d’impression!
#56543
08/2005
30
17
Fin
2
Depron
Laser-cut,
3
mm
thick
18
Rudder
2
Depron
Laser-cut,
3
mm
thick
19
Rudder reinforcement
2
CFRP strip
0.8 x 3 x 150 mm
20
Motor bulkhead
1
Plywood
Laser-cut, 3 mm thick
21
Elevon
horn
2
Plastic
Ready
made
22
Elevon snake outer
2
Plastic
1.9 x 0.9 Ø x 400 mm
23
Pushrod 2
Steel
0.8
Ø
x
500
mm
24
Snake
support
2
Depron
Laser-cut,
3
mm
thick
25
Servo
2
- Order
No.
5116.LOSE
26
Rudder
horn
2
Plastic
Ready
made
27
Rudder snake outer
2
Plastic
1.9 x 0.9 Ø x 320 mm
28
Pushrod 2
Steel
0.6
Ø
x
400
mm
29
Snake
support
2
Depron
Laser-cut,
3
mm
thick
30
Servo
1
- Order
No.
5116.LOSE
31
Air scoop, lower section
1
Depron
Laser-cut, 3 mm thick
32
Extension
lead
3
- Order
No.
3071
33
Speed
controller 1
- Order
No.
2873
34
Heat-shrink
sleeve
3
Plastic
Order
No.
3391.4
35
Receiver 1
- Order
No.
7020
or
3549.10
36
Lower
hull
shell
1
Depron
Vac.-moulded,
3
mm
thick
37
Sponson cover plate
2
Depron
Laser-cut, 3 mm thick
38
Lower right-hand sponson
1
Depron
Vac.-moulded, 3 mm thick
39
Lower left-hand sponson
1
Depron
Vac.-moulded, 3 mm thick
40
Air scoop, upper section
1
Depron
Laser-cut, 3 mm thick
41
Battery box side panel for
2
Depron
Laser-cut, 3 mm thick
350 mAh battery
42
Battery box side panel for
2
Depron
Laser-cut, 3 mm thick
650 mAh battery
43
Top / bottom, battery box
2
Depron
Laser-cut, 3 mm thick
44
Electric motor
1
-
Order No. 7707 or 7718
45
Propeller
driver
1
- Order
No.
7690.3
46
Slow-Fly
prop
1
- Order
No.
2945.18.10
47
Planing
skid
2
ABS
Laser-cut,
1
mm
thick
48
Chine
1
ABS
Laser-cut,
1
mm
thick
49
Servo output arm
4
Plastic
Cut from output arm supplied
with
Order
No.
5116.LOSE
50
Link pushrod
2
Steel
0.8 Ø x 180 mm
51
Guide
vane
2
ABS
Laser-cut,
1
mm
thick
Please note that the Parts List also contains components which are not included in the kit. These parts must be obtained
separately.
You will also need the following parts (not included in the kit)
1 x COMPACT 260 8.4 V electric motor, Order No. 7707
1 x Propeller driver, Order No. 7690.3
or
1 x COMPACT 290 SP 7.4 V electric motor, Order No. 7718
1 x Compact Control 10 speed controller, Order No. 2873
3 x C 1041 servo, Order No. 5116.LOSE
1 x XP 10 FM 35 MHz receiver, Order No. 7020
or
1 x R 600 FM 35 MHz Light receiver, Order No. 3549.10
1 x 3 LiPo 350 11.1 V / 350 mAh flight battery, Order No. 7605.3
or, for longer flight times:
1 x 3 LiPo 650 11.1 V / 650 mAh flight battery, Order No. 7610.3
1 x Graupner 18 Ø x 10 cm Slow Fly prop, Order No. 2945.18.10
1 x Copper flex cable, Order No. 3071
1 x Heat-shrink sleeve, Order No. 3391.4
Optional accessories (not included in the kit)
1 x Depron adhesive set, Order No. 5824 (contents: styrofoam cyano-acrylate, UHU por, adhesive tape)
Radio control system
1 x MC-12 35 MHz radio control set, Order No. 4724
Other Graupner/JR FM radio control systems are also suitable.
