This function allows you to perform the FREE MIXER programming setup.
- MIXER
It is use to select the mixer number that you want to use
Press ENT button to highlight the default value 1 then press UP/DOWN button to select
the desired channel. Press ENT button to remove the highlight. 5 mixers from 1 to 5 are
available.
16-4. RX FREE MIXER
ENT
ESC
TEL
VIW
ENT
ESC
TEL
VIW
ENT
ESC
TEL
VIW
ENT
ESC
TEL
VIW
press
press
press
- POSITION
It indicates the operating range of throttle at OUTPUT CH.
ENT
ESC
TEL
VIW
- FAIL SAFE ALL
It is used when you change failsafe position value of all channels. You need set all channels to
FAIL SAFE to use this function.
Press DOWN button to access to FAIL SAFE ALL line then press ENT button to highlight the
default value NO. Move and hold transmitter throttle at the desired position then press ENT
button, the failsafe value corresponding to throttle position is set. After setup FAIL SAFE ALL,
if you need to check whether the fail safe function is normal worked, turn off both of transmitter
and receiver’s power then servos should be operated to the preset failsafe.
ENT
ESC
TEL
VIW
ENT
ESC
TEL
VIW
ENT
TEL
VIW
ENT
ESC
TEL
VIW
press
press
press
62
Summary of Contents for m-12 HOTT
Page 77: ...mz 12...
