139
Program description: Trainer system
2FL” setting in the “
Basic settings
” menu), or two eleva-
tor servos connected to 3 and 8 (“2Sv EL” setting in the
“
Basic settings
” menu).
You still have to assign a Trainer transfer switch on the
right of the screen so that you can actually transfer con-
trol to the Pupil. This is accomplished by using the arrow
buttons of the left or right-hand touch-key to place the
marker next to “SW” at bottom right, and assign a switch
as described on page 39.
We recommend that you use one of the two momentary
switches SW 1 or SW 9 as the transfer switch, to ensure
that the Teacher transmitter can regain control instantly
at any time.
¿
T
1 2 3 4 5 6 7 8
P
BIND:
SW:
N/A
9
TRAINER/Teach
Note:
The switch assignment procedure described above
determines which transmitter provides the Teacher
function, and which provides the Pupil function. For this
reason a switch must NEVER be assigned to the Pupil
transmitter in this menu.
To underline this, the menu
headline switches from “TRAINER / pupil” to “TRAI-
NER / teacher” as soon as a switch is assigned.
Now use the arrow buttons of the left or right-hand
touch-key to move the marker to “BIND: N/A” on the
right:
¿
T
1 2 3 4 5 6 7 8
P
BIND:
SW:
N/A
9
TRAINER/Teach
Binding the Pupil transmitter to the Teacher trans-
mitter
Note:
During the binding procedure the distance between the
two transmitters should not be too great. You may need
to change the relative position of the two transmitters
and initiate the binding process a second time.
If necessary, close the Trainer transfer switch which you
have just assigned …
¿
T
1 2 3 4 5 6 7 8
P
BIND:
SW:
N/A
9
TRAINER/Teach
… and start the “BINDING” process fi rst at the Pupil
transmitter by briefl y pressing the central
SET
button of
the right-hand touch-key …
–P
T
2 3 4 5 6 7 8
BIND:
SW: –––
1
BINDING
TRAINER/Pupil
… and immediately afterwards that of the Teacher
transmitter:
¿
T
1 2 3 4 5 6 7 8
BIND:
SW: 9
P
BINDING
TRAINER/Teach
As soon as this process is concluded, both screens dis-
play “ON” instead of the fl ashing message “BINDING”:
¿
T
1 2 3 4 5 6 7 8
BIND:
ON
SW: 9
P
TRAINER/Teach
–P
T
2 3 4 5 6 7 8
BIND:
ON
SW: –––
1
TRAINER/Pupil
This concludes the binding process, and you can return
to the basic display of both transmitters, and start trainer
mode operations - once you have checked the operation
of all the functions.
However, if neither transmitter, or only one of the trans-
mitters, displays “ON”, indicating that the binding proce-
dure has failed, try changing the relative position of the
two transmitters, and repeat the whole procedure.
During …
Summary of Contents for mx-16 HOTT
