54
Program description: model memories
copied to the SD card.
Notes:
If the warning …
•
SD-CARD
INSERT
OK
… appears instead of a model selection, there is no
SD card in the card slot; see page 22.
When you copy a model memory, the binding data is
•
copied along with the model data, so that the receiv-
ing system associated with the original model mem-
ory can also be operated using the SAME transmitter
and the copied memory without repeating the bind-
ing procedure.
An exported fi xed-wing model is stored on the memo-
•
ry card under \\Models\mx-16 with the format “aMod-
elname.mdl” and a model helicopter with the format
“hModelname.mdl”. However, if you export a “name-
less” model, then you will fi nd its data stored on the
memory card under “a-” and “hNoName.mdl”.
Some of the special characters used in certain mod-
•
el names cannot be accepted due to specifi c limita-
tions of the FAT or FAT32 fi le system used by memo-
ry cards. During the copy process they are replaced
by a tilde (~) character.
If the memory card already contains a model fi le of
•
the same name, it will be overwritten without warning.
Import from SD
Use the arrow buttons
cd
of the left or right-hand
touch-key to select the “Import from SD” sub-menu, then
briefl y press the
SET
button.
select model
clear model
copy mod–>mod
=>
=>
=>
=>
=>
expor t to SD
impor t from SD
=>
=>
Use the arrow buttons
cd
of the left or right-hand
touch-key to select the model to be imported from the
SD memory card:
EXTRA
ALPINA
COBRA
BELL47G
impor t from SD-CARD:
11/03/10
11/03/11
11/03/11
11/03/12
When you do this, and briefl y press the
SET
button of
the right-hand touch-key again, an “Import to model:”
window is displayed. Use the arrow buttons
cd
of the
left or right-hand touch-key to select the target memory,
confi rm your choice with
SET
, or press
ESC
to interrupt
the process. An occupied memory can be overwritten:
01
03
04
ULTIMATE
02
GRAUBELE
STARLET
BELL47G
impor t to model :
05
¿¿
free
¿¿
E08
E08
E08
–––
When you confi rm the selected model memory by touch-
ing the
SET
button, this security query is displayed:
model
ULTIMATE
impor t ?
NO
YES
01
03
¿¿
free
¿¿
You can interrupt the process with
NO
; if you do this, you
are returned to the starting screen. However, if you use
the
f
button to select
YES
, and confi rm your choice
by touching the
SET
button, then the selected model is
imported into the selected model memory.
Notes:
If the warning …
•
SD-CARD
INSERT
OK
… appears instead of a model selection, there is no
SD card in the card slot; see page 22.
When you import a model memory, the binding data
•
is copied along with the model data, so that the re-
ceiving system associated with the original model
memory can also be operated using the SAME trans-
mitter and the copied memory without repeating the
binding procedure.
Summary of Contents for mx-16 HOTT
