• Alternatively the offset value of the "OFF-
SET" line of the option "AILE" so as the
previously mentioned "corresponding off-
set positions of the aileron pairs" can be
left to the standard value "000%" ...
… and instead of that input a proper offset
value in the "CH6" line of the sub-menu
"
CTL Set
", for example:
• In case of
ACT
=
INH
or
OFF
of the
"
Flap set
" sub-menu described in the fol-
lowing section, all the provided flaps move
in the position corresponding to the control
position ("
CTL Set
"), offset value and trav-
el setting so as ("
Flap MIX
") RATE and off-
set values of the respective flaps positions.
• In case of
ACT
=
ON
of the "
Flap set
"
sub-menu described in the following sec-
tion, all the provided flaps move in the po-
sition corresponding to the control position
("
CTL Set
"), offset value and travel setting
so as ("
Flap MIX
") offset and ("
Flap set
")
RATE values of the respective flaps posi-
tions.
Touch the
RES
button to reset a changed value in the
blue (and hence active) field to the default value.
After you have finished making your settings, touch
the
BACK
button at the top left to return to the mixer
selection:
Touch
AILE >> FLAP line
In this line, you can set for each phase the amount of
movement of the flap pair "FLAP" (and possibly
"FLAP2") as an aileron when the aileron is actuated.
Normally, the flaps follow the ailerons with less de-
flection, that is, the mixed amount is less than 100%.
The setting range of ±125 % makes it possible to ap-
propriately adapt the direction of deflection to the ai-
lerons depending on the direction of rotation of the
flap servos.
Notice
Since all values are set separately, the aileron de-
flections of the flaps can also be different. In case
of "glider" is instead suggested to use the op-
tions "Diff." and "Red." which are available in the second
display page of the "
Aile diff
" sub-menu.
In the lowest "TRIM" line you can also set the grade of
action of the aileron trim on the aileron function of the
flaps between 0 and 150%.
Adapt the individual values as described above, for
example:
194
Function menu | Airplane models - Flaps mixer
Summary of Contents for mz-24 PRO
