background image

3

4

-   CONTENTS   -

BEFORE USE  
SUPPORT AND SERVICE 

   CUSTOMER SUPPORT 
   INTERNET SALES SITE / FIRMWARE UPGRADE
   A/S SUPPORT
   WARRANTY INFORMATION

OPENHOBBY A/S SUPPORT AND SERVICE CENTER
BOX CONTENTS 
SAFETY PRECAUTIONS 
SPECIFICATIONS
CHARGER CONTROL IDENTIFICATION
MENU CONFIGURATION

   ACTION BUTTONS
   MENU DESCRIPTION

BATTERY CONNECTION
INPUT POWER SETUP 
MAIN PAGE
PROFILE PAGE

   DISPLAY
   BATTERY NAME EDITING

CHARGE PAGE

   LiPo, LiIon, LiFe BATTERY CHARGE SETUP
   NiCd/ NiMH BATTERY CHARGE SETUP
   Pb BATTERY CHARGE SETUP
   LiPo, Lilon, LiFe, NiCd, NiMH, Pb BATTERY CHARGE PROCESSES
   CHARGE MODE PER BATTERY TYPE

DISCHARGE PAGE

   LiPo, LiIon, LiFe, NiCd, NiMH, Pb BATTERY DISCHARGE MODES
   LiPo, Lilon, LiFe, NiCd, NiMH, BATTERIES DISCHARGE PROCESSES
   DISCHARGE MODE PER BATTERY TYPE

CYCLE PAGE

   LiPo, Lilon, LiFe, NiCd, NiMH, Pb BATTERY CYCLE PAGES
   LiPo, Lilon, LiFe, NiCd, NiMH, Pb BATTERY CYCLE PROCESSES
   CYCLE OPERATION MODE PER BATTERY TYPE

BALANCE PAGE
DATA VIEW PAGE
USER SETUP PAGE
MISC PAGE (ADDITION FUNCTION)

   SERVO AND BRUSHLESS MOTOR TESTING SETUP
   BRUSHED MOTOR SETUP
   WARMER SETUP
   SPEED CONTROLLER SETUP

FACTORY SETUP AND SCREEN CALIBRATION

   DATA INITIALIZATION
   TOUCH CALIBRATION
   RESOURCE UPGRADE

   BLC PORT TEST

4

4
4
4
4
4
5

5-6

7-8

9-10

11
11
11
11

12
12

12-13

13
13

14-19

14
15
15
16

16-18

20-23

20

21

21-22

23-27

24
24
25

27-28

28-29

29-30

31

31-33

34-35

35-37
37-38

39-41

40
40

41
41

   ◎ BEFORE USE

 

   ◎ SUPPORT AND SERVICE 

   ◎ OPENHOBBY A/S SUPPORT AND SERVICE CENTER

3245 University Ave, Suite 1520
San Diego, CA 92104, United States of America  
Phone: +1 855-5-RCisHoTT (+1 855-572-4746)
Customer Service E-mail: service@openhobby.com

©

2013 Graupner/SJ USA - OPENHOBBY LLC. The HoTT trademark is used with permission of SJ Inc. 4386066

    Internet sales site / Firmware Upgrade

Please visit us at www.openhobbby.com, to stay up to date with the latest software and 
firmware for your products.

    Customer support 

We  are  happy  to  assist  you  with  any  question  by  e-mail  or  phone.  Customer  service 
hours are from 9 am to 5 pm PST (Pacific Standard Time) during the workweek, Monday 
through Friday. E-mailed questions will be answered as soon as possible.
  

Thank you for purchasing the POLARON EX 2CH DC Charger. Designed for both novices and pro-
fessionals, this system is extremely versatile. To make the best use of your system, please read this 
manual carefully.
For any difficulties with your system, we offer multiple resources to assist you, including this referenece 
manual, an online Frequently Asked Questions webpage (www.openhobbby.com), your hobby dealer, or 
the Graupner/SJ Service Center (contact information below).
Due to unforeseen changes in production procedures, the information contained in this manual is
subject to change without notice.

    A/S support 

During the warranty period, we can repair this product at no cost for products that have 
become faulty under normal operating conditions. For non-functional products that are 
past  the  expiration  date  of  the  warranty  or  have  been  improperly  used,  we  would  be 
happy to repair this product for an appropriate amount of cost to the consumer.
warranty period. 

    Warranty information

Refer to the WARRANTY CARD in the Package.

SLAVE BOARD UPGRADE (PRODUCT UPDATE)
ERROR MESSAGES
COMMON PROBLEMS AND PRECAUTIONS FOR THE POLARON EX DC CHARGER
NiCd/MH BATTERY SAFETY
Pb BATTERY SAFETY
Lilon, LiPo, LiFe BATTERY SAFETY

THE GUIDE FOR THE RELATED COUNTRIES’CERTIFICATIONS

ENVIRONMENTAL PROTECTION NOTES

 

41

42-44

45
46
46

46-47

48
48

Summary of Contents for Polaron EX

























Reviews: