GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
We reserve the right to introduce modifications. Not liable for printing errors!
01/2012
Made in
Vietnam
4
Particularly recommended: Computer-System from MX-16 to mc-24. For rudder,
elevators, ailerons, airbrakes, and engine throttle, servos with standard dimensions
are installed.
For the retractable undercarriage, the design calls for servos measuring 13 mm in
with and about 54 Ncm.
Each of the two aileron servo cables, needs an extension cable, Order No. 3935.50
to extend them.
As receiver battery, we recommend: LiPo 2/1600 Order No. 9717.2 in connection
with the ON/OFF switch PRX 3A Order No. 4135, which has to be carefully serviced
before and after all flight operations.
In this regard, see also the instructions for the RC system, batteries, et cetera.
To connect the servos for ailerons, airbrakes, and retractable undercarriage, insert
the 180 mm extension cable into the corresponding socket on the receiver. To store
the receiver and battery, for example cellular cauoutchouc (rubber), Order No. 1637
is needed.
Adhesives
Casein glue, such as UHU coll, Order No. 958.60
UHU hart, such as Order No. 534.35
Fast setting glue, such as Order No. 5822
Thread lock fluid, such as Order No. 952
Accessories for operation with internal combustion engine (not included)
Fuel with synthetic oil, depending on the motor used
Fuel filter, such as Order No. 1650.1
Fuel hose, such as Order No. 1643
Manual fuel pump, such as Order No. 1610
Spark plug battery with spark plug clip, such as Order No. 3253
Electric starter, such as Order No. 1628
Starter battery such as Order No. 2592
Accessories for operation with electric motor (see table)
Chargers, see main catalogue FS
Required tools (not included)
Various (Philips) screwdrivers, flat-nose pliers, wire cutter, balsa knife or razor blade,
various drills, universal spark plug wrench, soldering iron, various Allen wrenches.
Do not begin the assembly until you have familiarised yourself well with the
components and the individual construction stages. If you are not satisfied with any
component, report it to your retailer before you start the construction process.
Assembly of the SEA FURY 1800
