background image

  ◎ BEFORE USE

  ◎ SUPPORT AND SERVICE

  ◎ OPENHOBBY A/S CENTER

Thank you for purchasing Graupner/SJ X-4S HoTT 2.4GHz Radio 
System. This system is extremely versatile and may be used by 
beginners and pros alike. In order for you to make the best use 
of your system, please read this manual carefully. If you have any 
difficulties while using your system, please consult the manual, our 
online Frequently Asked Questions (on the web pages referenced 
below), your hobby dealer, or the Graupner/SJ Service Center. 
Due to unforeseen changes in production procedures, the informa-
tion contained in this manual is subject to change without notice.

4

    Customer support 

 We are happy to assist you with any question by e-mail 
or phone. Customer service hours are from 9 am to 5 pm 
PST (Pacific Standard Time) during the workweek, Monday 
through Friday. E-mailed questions will be answered as 
soon as possible  

    A/S support

During the warranty period, we can repair this product at 
no cost in the event that it has become faulty under nor-
mal operating conditions. 
For non-functional products that are past the expiration 
date of the warranty or have been improperly used, we 
would be happy to repair this product for an appropriate 
amount of cost to the consumer.

    Online Support   

Please visit us at www.openhobbby.com, to stay up to 
date with the latest software, firmware and product infor-
mation.

    Warranty information

Refer the WARRANTY CARD in the Package

3245 University Ave, Suite 1520, San Diego, CA 92104, 
United States of America 
Phone: +1 855-5-RCisHoTT ( +1 855-572-4746)           
Fax: +1 855-546-0350 
E-mail: service@openhobby.com 

©2014 Graupner/SJ USA – OPENHOBBY LLC. The HoTT trademark is used 
with permission of SJ Inc. 4386066

Summary of Contents for X-4S HoTT SJ

















Reviews: