Please have a look at the manufacturer's descriptions when using this object.
● Always keep the machine out of reach of children.
● Always switch off the device. Before cleaning, maintaining or repairing the
machine, allow it to cool down completely. In addition, the power cord must
be unplugged from the electrical socket. When the device has cooled down
completely, you can clean it with a damp cloth.
● Do not immerse the unit, power cord or plug in water or any other liquid.
● Do not place the object on or near a gas or electric burner, stove or other
heat source.
● Do not operate the product with a USB cable or connector that is not in a
good condition.
● Do not leave any cables near a heat source. It may deform the cord or melt
the insulation and cause an electric shock or fire.
● Do not open the product or atempt to repair it by yourself.
● Risk of electric shock! DO NOT touch the plug, cord or device with wet
hands
● If you need to unplug the power cord, you may always do so by removing
the plug. Pulling on the cord can damage it.
● Do not scratch, cut, twist, bend, tie or place a heavy object on the cord.
● Do not let the cord hang over the edge of the table. To avoid tripping over
cables that are bent by accident, simply place it in a suitable position. This
way, other people will not touch such element.
● Do not connect too many plugs into the same electrical outlet.
● Do not connect the machine if the mechanisms do not work properly due
to possible knocks, falls or last-minute damage.
● Fire hazard! While the press is in operation, do not cover its main parts
with a cloth or blanket during operation.
● No modifications, alterations or readjustments are permited. The
company is not responsible for damages caused by an improper use of the
device.
Safety Instructions
Page 23
