GB - 15
Auxiliary Hydraulic Control
To operate attachment in reverse
direction, push auxiliary
hydraulics lever to the forward
position.
To stop the attachment, put the
lever in the center or neutral
position.
To operate attachment in forward
direction, pull auxiliary hydraulics
lever into the rearward position.
Lift Arm Cylinder Lock
The cylinder lock must be used when servicing
components beneath the lift arms. Always use the
cylinder lock to avoid serious injury. To engage the
cylinder lock:
1. Remove the attachment.
2. Raise the lift arms to the fully raised position.
3. Shut off engine and remove ignition key.
4. Remove the retaining pin and pivot the cylinder
lock down to the top surface of the cylinder barrel.
5. Move lift arm lever forward until cylinder lock
contacts cylinder.
To disengage cylinder lock:
1. Start engine.
2. Raise lift arms to fully raised position.
3. Shut off engine.
4. Return the cylinder lock to the storage position and
replace the pin.
IMPORTANT:
Always position cylinder lock all the way
up and secure with retaining pin to avoid damage to
unit when lift arms are lowered.
5. Start the engine.
6. Lower the lift arms.
7. Stop the engine.
Attachment Lock Pins
The attachment lock pins secure attachments to the
unit’s mounting plate. Always be sure appropriate lock
pins are engaged before operating attachments.
Traction Selector Knob (Optional Hydraulics)
The traction selector knob transfers
power between the attachment and
the drive wheels.
Turn knob counterclockwise to increase drive speed
and decrease power to attachment.
Turn knob clockwise to decrease drive speed and
increase power to attachment.
NOTE:
Rotate traction knob 1/2 to 1/4 turn
counterclockwise from full clockwise position for best
performance.
WARNING:
Check that auxiliary lever is in
neutral position before starting engine.
Attachment may move if control and Hydraulic
Activator Switch are engaged and may injure
operator or bystander.
OK0470
Cylinder Lock (Down)
Cylinder Lock (Up)
Retaining Pin
OK0511
Engaged
Disengaged
Engaged
Disengaged
077544
OK0480
