IS CHIPS COLLECTOR
• 17
Installation
Mounting the suction tube
S w i t c h o f f t h e m a c h i n e b e f o r e
proceeding with any operation:
unplug the power supply cable from
the mains.
1.
Remove the depth regulating nose which is
mounted on the spindle of the machine
(example : GravoTech M20).
2.
Slide the flexible connector
onto the
suction tube
and screw the connector
with hose on entry
of the chips collector
.
Do not over tighten the flexible
connector
to avoid creating an
obstruction.
3.
Pass the suction tube
through the trap
door
to the back of the machine
(example : GravoTech M20).
4.
Install a vacuum nose
on the suction
tube and on the spinde of the machine
(example : GravoTech M20).
GravoTech M20
