L-SOLUTION 100 Ex Fibre machine
. 40
First contact
Printer driver
Power Setting
LASER power is controlled by assigning the percentage of power
from 0 - 100% to each color used in the graphic drawing.
Speed Setting
This setting controls how fast the motion system moves in a
percentage of the maximum speed of the LASER engraver.
The actual time that an object takes to engrave is entirely
dependent on the size of the graphic.
Higher power settings and slower speeds will produce deeper
engraving.
LASER Frequency
The LASER frequency indicates the pace of the LASER shootings.
The more this frequency is strong, the more the number of
shootings per second is important. It allows to obtain a LASER
point more or less big.
Focussing
A Focussing can be defined by the user (depth) at each pass.
The value indicated is the distance to be sent between two passes
for making the engraving material rise so as to be within the
LASER focus during the next pass (negative values are possible).
A focussing of 0.10 mm will be carried out after each pass (0,10*).
A focussing of 0.10 mm will be carried out before the first pass
and then after each pass (*0,10).
Passes
The number of passes can vary from 1 to 9
.
