First contact
L-SOLUTION 100 Ex Fibre machine
. 5
Regulatory information
Compliance standards
This hardware was designed and built in compliance with the relevant EC marking and EEC directives:
• "Security" Directive 2006/42/EC
• "Electromagnetic compatibility" Directive 2004/108/EC
• "Low voltage" Directive 2006/95/EC
Any change or transformation made to this equipment, any adaptation or installation
of accessories not recommended by GRAVOTECH MARKING SAS, any installation of
this equipment in a manufacturing process, any piloting by a robot, any connection
to an external automaton, any change to the characteristics of this material, can
make it become non-compliant with the European Directives it is subjected to.
Such changes void the manufacturer's responsibility.
In this case, the person who fits the machine and the equipment is responsible for the EC
compliance of the final work station.
Electrical security
This hardware complies with standards EN 60204-1 and EN 60950-1, which also refer to the LASER system safety
standard CEI 825-1.
Machine security
This hardware complies with standards EN ISO12100-1, EN ISO12100-2 and EN ISO 11553-1.
Electromagnetic compatibility
This hardware complies with the following electromagnetic compatibility standards:
• EN 55022 - class A
• EN 61000-3-2
• EN 61000-3-3
• EN 61000-6-2 (immunity in an industrial environment)
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Electrical security
This material is "class 1". The mains plug MUST always be connected to a neutral
socket and comply with the regulations in force in the country of installation. If
you do not have a plug of this type, have one installed by an approved electrician.
Under no circumstances should you depart from this instruction.
The manufacturer bears no responsibility towards any user where alterations have been carried out contrary to the
manufacturer's specifications, notably with respect to electrical/electronic elements.
Any operation, other than those mentioned here, must only be carried out by an approved
Gravograph technician.
Do not take the machine apart to repair or clean it : this will void your guarantee.
This symbol indicates that once this equipment has reached the end of its
useful life, it must not be disposed of with non-sorted municipal waste, in
accordance with the European Directive 2002/96/EC.
The equipment must be disposed of at an appropriate collection point for processing,
sorting, and recycling of Waste Electrical and Electronic Equipment (DEEE).
The elements which compose Electrical and Electronic Equipment may contain
substances which have harmful effects on the environment or on human health.
By following these instructions, you are helping the environment, contributing to the
preservation of our natural resources, and protecting human health.
Regulatory
