L-SOLUTION 100 Ex Fibre machine
. 74
First contact
Options and accessories
Many options and accessories are available for this LASER machine. The cylinder attachment, the air compressor kit, lens
kits, the vacuum table and the Honeycomb cutting table are available at an additional cost.
Cylinder attachment
(diagram 1)
The cylinder attachment has been designed to engrave cylindrical objects. Two attachments come with the fixture, a cone
shaped disk attached to the motorized end of the fixture and an inverted cone shaped disk attached to the adjustable end
of the fixture. These attachments are used to hold wineglasses, mugs, cups, etc.
The cylinder attachment is placed on the engraving table. Please refer to the instructions supplied with the cylinder
attachment on how to properly install and use this option.
Options and accessories
L-SOLUTION 100 Ex (Fibre) vacuum table
The L-SOLUTION 100 Ex (Fibre) vacuum table is an accessory designed to hold plates in place using suction, on the
L-SOLUTION 100 Ex (Fibre) engraving machines.
The L-SOLUTION 100 Ex (Fibre) vacuum table is placed on the engraving table. Please refer to the instructions supplied
with the vacuum table on how to properly install and use this option.
