First contact
L-SOLUTION 100 Ex Fibre machine
. 75
Compressor kit (air assist)
One compressor kit is available (
ref. 47191
).
The compressor kit is first mounted on a plate which must be installed on the machine
(photo 4 - ref. 47191)
.
The installation is described in the user manual provided with the kit.
It permits to supply compressed air in order to ensure the air assist function
without connecting an external compressor to the (N7) air inlet (Pneumatic
supply for the air assist) :
- With the compressor kit
ref. 47191
kit : 0,8 bar - 12,4 l/min opened valve
<---> 11.6 PSI- 0.0162 yard
3
/min opened valve
- Pour le kit
réf. 49825
: 1 bar - 18,4 l/min robinet ouvert
Options and accessories
Honeycomb cutting table
The purpose of the Cutting Table
(schéma 5)
is to support the material that you are cutting off of the engraving table’s
surface to minimize surface contact area. It also redirects exhaust airflow below and above the material for better smoke
removal.
The honeycomb material is reflective only in the area that contacts your material to minimize LASER beam reflection.
Installation :
1. Place the cutting table on the machine engraving table.
2. Position the cutting table by leaning it against the engraving table rulers
(diagram 5)
.
Fiber Lens kits
Réf. 47191
2,0" lens kit - focus - 62180
50,8 mm - 2.0 in
3,0" lens kit - focus - 64454
76,2 mm - 3.0 in
4,0" lens kit - focus - 64455
101,6 mm - 4.0 in
