First contact
L-SOLUTION 100 Ex Fibre machine
. 77
Printer driver setting tips
There are many variables that can affect the engraving process such as differences in the thickness of the material, density
of the material, composition of the material, and the manufacturing processes used to make the material.
Power Setting
It allows a more or less important contrast.
A high power allows a bigger contrast. Has no effect on running time.
Speed Setting
Higher saves time.
PPI Setting
- Higher allows to stack points what gives a better contrast and\or more details.
NOTE
The LASER system can reach engraving speeds up to 98.4 inches per second (2.5 ms
-1
) when set to 100% speed in the
driver. When engraving very small objects, this speed cannot be achieved because acceleration and deceleration of the
motion system requires time and distance. The LASER system will automatically adjust itself to a maximum engraving
speed that it can achieve due to the size and position of the graphic. This is why you might notice that there might be
no difference in engraving time on certain graphics whether you choose 100% speed or less.
List of materials for Fiber LASER engraving :
STEEL / STAINLESS STEEL
GRAVOXAL / ALUMINUM - ANODIZED
GRAVOMETALL / BRASS - PAINTED
GRAVOBRASS / BRASS
GRAVOGLAS 1
METALLEX / METALLEX 2
GRAVOPLY 1 / GRAVOPLY 2
GRAVOTAC
STICKALASE
ALUMINAZ
GRAVOLASE
GRAVOSTRAT / MELAMINE
POLYCARBONATE
COPPER / SILVER / GOLD
LEATHER
ALUMINUM
ABS
CERAMIC
TITANIUM
CARBIDE
Materials
