Gravograph Machines - Soft setup
LPT or COM
connection
1.
Next>
Click. Configure your machine as Windows printer in Properties
dialog box.
> Click Next to select the type of port to communicate with machine
2.
Ports
Click tab.
3. Click the port onto you plugged the cable that links the PC and the
engraving machine.
Click LPT or COM, followed by the port number.
4.
General
Click tab.
5. Give this printer the name of your engraving machine followed by the
selected port (for example LPT1: or COM2:).
6.
OK
Click.
7. In Printers check that your machine is displayed as new printer
January 8, 2009
7
