Gravograph Machines - Soft setup
Make a Gravograph laser machine ready to engrave with LaserStyle
A.
Set up Gravograph L-Solution driver onto your computer.
Use GS5 DVD to set up driver.
B.
Set the softlink between PC and laser machine.
C. Make your laser machine ready to engrave with LaserStyle Gravograph software.
•
Check the USB port assigned to L-Solution printer you have just added.
•
Set up GT Smartstream driver for data exchange between LaserStyle and your laser
machine.
•
Enable your laser machine in LaserStyle engraving program.
Checking the USB port assigned to L-Solution printer you have added
1. In Start menu or in Control panel double-click Printers.
2.
Right-click the printer you have named like your laser machine.
3.
Click Properties in contextmenu.
4.
Ports
Click tab.
5.
In Port list, locate USB port ticked.
Setting up GT Smartstream driver for Gravograph laser machine
1. In Start menu double-click Printers.
2. Click
Add printer command in File menu.
3. Add printer wizard opens.
Next>
Click.
4.
Click Local printer ( Plug & Play box unticked).
Next>
Click.
5. Click
USB Port assigned to L-Solution printer.
Next>
Click.
6. Locate GT Smartstream driver.
a.
Have disk
Click.
b.
Browse
Click.
c. Double-click GS5 DVD
d.
In .\Driver\GT Smartstream folder click
GT_Smartstream.inf file.
e.
Click.
8
