MAX V2
User's manual
16
15
Timings
Another monitor listening time
8 hours
8 hours
1 minute
2 minutes
display off after 10
minutes with no
actions
Manual off
10 minutes
5 seconds
10 seconds
10 minutes
1 minute
1 minute
10 seconds
5 seconds
10 seconds
Door panels view time
Video cameras view time
Max. answer waiting time
Min. answer waiting time
Photo view
Calendar and clock view
Max. length of the voice message
Max. length of the manual video record
Image change time interval during slide show
Alarm clock melody length
Alarm clock repeat time
Standby mode with no actions
DVR turn on time from standby mode
DVR turn on time from calendar mode
Video capturing function
SD card volume
Video resolution
Frame rate
2 Gb
4 Gb
8 Gb or more
1 Gb
5 fps
2 fps
10 fps
10 fps
320*240 pixels
320*240 pixels
320*240 pixels
640*480 pixels
System settings options
CHIME TIME
can be seted as (in seconds): 05S/10S/15S/20S/25S/30S/35S/40S/45S/50S/55S/60S.
CHIME VOLUME
can be changed as: 10%/20%/30%/40%/50%/60%/70%/60%/90%/100%
CHIME TYPE SETTINGS
you can set any of 9 mp-3 melodies for every door panel (DOOR1 CHIME TYPE or
DOOR2 CHIME TYPE) and also INTERCOM CHIME TYPE
DON'T DISTURB
turn this function on if you want to disable call melody from the door panel.
CAN BE MONITORED
if monitor mode is disabled, or if monitor mode is enabled.
MULTIMEDIA MENU ICONS NAME
makes icon names invisible, - icons names are visible.
AUTO CAPTURE QUANTITY
automaticly captures 1,2 or 3 images when incoming call from the door panel
was detected.
COPY FILES TO SD CARD
lets you copy all files from the monitor memory to micro SD card. Choose COPY
to start copying files or CANCEL to exit without copying.
DVR
SETTINGS
this function
described on the 9th page of the manual.
ANSWER MODE
can be set as MANUAL ANSWER, AUTO ANSWER or CALL TRANSFER to the telephone.
DEVICE ADDRESS
can be set as ROOM1-ROOM4, see details on the 14th page of the manual.
PORT2 STATE
can be set as: DOOR2/CCTV1/CCTV2, depends on the device, connected to the port2 input.
PHONE NUMBER SETTINGS
defines telephone number for the CALL TRANSFER function.
SYSTEM TIME SETTINGS
let you set system time and date.
ALARM CLOCK SETTINGS
this function described on the 12th page of the manual.
FORMAT
let you delete all the files from the internal memory of the monitor: FORMAT FLASH or delete all
the files from micro SD card: FORMAT SD CARD. Then choose ACT to start format or CANCEL to exit
without format.
SOFTWARE VERSION
show you software version of the monitor program
BACKGROUND IMAGE SETTINGS
set the image for menu background
RESTORE DEFAULT
restores all factory settings of the monitor
LANGUAGE
let you choose the language of the menues.
