NOTE:
It may be necessary to change the values used for Threshold Hi and
Threshold Low in the TSYS object to optimize Multi-site Roam
performance.
LTR Home Repeater AutoMove
LTR Home Repeater AutoMove takes the guesswork out of
programming LTR trunking systems when the home repeater
order is not known.
By default, LTR Home Repeater AutoMove is turned off and is
controlled in the individual TSYS objects. To enable LTR Home
Repeater Automove, access the menu for the desired TSYS,
then scroll down to the last item in the menu,
AutoMove HRs
.
Use the
keys to toggle AutoMove HRs on or off for the
selected TSYS, then press the
Save
softkey to save your
changes.
When AutoMove HRs is turned on, you may enter the LTR
system frequencies in any order, and the
0716
will
automatically move the frequencies to the proper home repeater
slots as transmissions are received on the system.
Priority Scan
Your
0716
scanner features Priority Scan operation for
CONV and TGRP objects. When Priority Scan is active,
increased priority is given to objects that have their
Priority
mode set to
ON
.
Turning Object Priority On or Off
Priority for CONV and TGRP objects can be toggled on or off
using the following methods:
Press the
PRI
key when the scanner stops on the object while it
is active. The
plD
indicator in the object display will show
p
for
Object Priority Off, and
P
for Object Priority On.
Browse to an object in Manual Mode or PGM mode, then press
the
PRI
key to toggle Object Priority on or off. The
plD
indicator
in the object display will show
p
for Object Priority Off, and
P
for
Object Priority On.
Browse to an object in PGM mode. Press the EDIT, then CURR
softkeys. Use the
key to scroll to the
Priority
setting. Use
the
or
keys to toggle
Priority On
or
Off
.
0716
User Manual
Page 67