12
SCAN/MAN
– Scans any preprogrammed channels or stops scanning and
lets you directly enter a channel number.
PRI/ALERT
– Turns on and off the priority feature; turns the SAME standby
mode on and off.
Number Keys
– Each key has single-digit (0 to 9) and a range of numbers. Use
the range of numbers above the key (21–40 for example) to select the channel
in a channel-storage bank.
TUNE/CLEAR
– Lets you tune a frequency along with or or, clears an
incorrect entry.
/ – Searches up or down for active frequencies or selects the direction
when scanning channels.
L/O RVW/L/O
– Reviews locked-out frequencies; lets you lock out selected
channels or frequencies.
/ – Locks (and unlocks) the keypad to prevent accidental entries; turns
the backlight on and off.
PGM
– Programs frequencies into channels.
DELAY /
• – Programs a 2-second delay for the selected channel; enters a
decimal point.
ENT
(enter) – Enters frequencies into channels.
A LOOK AT THE DISPLAY
The display has indicators that show the scanner’s current operating status.
This quick look at the display will help you understand how your scanner oper-
ates.
– Appears when the scanner sweeps the frequencies to rapidly detect,
monitor and store it for nearby radio transmissions.
– Appears when you lock the keypad.
BANK
– Appears with numbers (1–10) to indicate the scan bank. Bank num-
bers with a bar under them show which banks are turned on for scanning (see
“Understanding Banks” on Page 14).
WX
– Indicates that the scanner is active for weather channels.
MAR
– Indicates that the scanner is active for marine bank.
BANK
WX MAR
FD PD
/
AIR HAM
SRCH SCAN
CH
MAN PGM
PRI
DLY
1 2 3 4 5 6 7 8 9 10
B
L/O
