32
Locking Out Frequencies
To lock out a frequency during a search/tune, press
L/O/L/O RVW
when the
scanner stops on that frequency. The scanner locks out the frequency then
continues searching.
Note:
You can lock out as many as 100 frequencies during a search/tune
and 50 frequencies during a FM radio mode. If you try to lock out more,
L-O
Fr-FULL
appears (see “Reviewing Locked-Out Frequencies” and “Removing
Lockouts From All Frequencies”).
Reviewing Locked-Out Frequencies
To review the frequencies you locked out, press
FUNC
then press
L/O/L/O
RVW
during a search or tune, then repeatedly press
5
or
6
.
L-r
(Lockout
Review) appears and the scanner displays all locked out frequencies as you
press
5
or
6
, or,
EMPty
appears when the search/tune has no locked out
frequencies. When you reach the highest locked-out frequency, the scanner
beeps twice and returns to the lowest locked-out frequency.
If you press
CLEAR
using lock out frequency review, the lockout of the
frequency is cleared.
Removing Lockouts Form All Frequencies
1. Press
FUNC
then
CLEAR
while
L-r
appears.
2.
FLo ALL-CL
appears about 2 seconds. After 2 seconds,
YES ---Ent
and
No ---CLEAr
appears alternately.
3. Press
ENT
.
L-r EMPty
appears. The scanner clears any lockouts from all
frequencies in a search band. Or, if you do not want to clear the lockouts,
press
CLEAR
.
USING PRIORITY
The priority feature lets you scan through channels and still not miss
important or interesting calls on a frequency you select. You can program
one frequency into the priority channel. As the scanner scans, if the priority
feature is turned on, the scanner checks the priority channel for activity
every 2 seconds.
1. Press
PGM
, then press
PRI
while Scan/Manual mode.
PCH
and
000.0000
or the previously-stored frequency appears.
2. Enter the frequency you want to enter into the priority channel, then press
ENT
. The display flashes twice.
PSR200U-OM.indd 32
2010/02/22 16:24:44
