33
Turning the Key Tone On and Off
Each time you press any of the scanner’s keys, the scan-
ner sounds a tone. To turn the scanner’s key tone off or
on:
1. If the scanner is on, turn
VOLUME OFF/MAX
counter-
clockwise until it click to turn the scanner off.
2. Turn
VOLUME OFF/MAX
clockwise to turn the scan-
ner on.
Welcome To Scanning Receiver
appears.
3. While
Welcome To Scanning Receiver
appears, press
1
to turn on the key tone or
2
to turn it off.
Using the Display Backlight
You can turn on the display’s backlight for easy viewing
in dimly lit areas. Press
LIGHT
to turn on the backlight for
5 seconds. To turn off the backlight before it automati-
cally turns off, press
LIGHT
again.
To turn on the backlight so it does not turn off automati-
cally, press
FUNC
then press
LIGHT
. Press
LIGHT
while
the backlight is on to turn it off.
You can select the amount of time the light stays on. Fol-
low these steps to change the illuminated time:
1. If the scanner is on, turn it off and back on again.
Wel-
come To Scanning Receiver
appears.
2. While
Welcome To Scanning Receiver
appears, press
LIGHT
.
3.
Use Up/Down keys to set light T/O ENTER key saves. 5
seconds
appears (Default setting: 5 seconds).
4. Press
/\
or
\/
to select 3, 5, 10 or 20 seconds then
press
ENTER
.
Using the Keylock
Once you program your scanner, you can protect it from
accidental program changes by turning on the key lock
feature. When the keypad is locked, the only controls that
operate are
FUNC
,
KEY
,
LIGHT
,
SQUELCH
, and
VOL-
UME
.
You cannot activate the key lock while you are entering a
frequency into a channel.
To turn on the key lock, press and hold
KEY
about 3 sec-
onds.
Key locked.
appears for about 1 second.
Key locked.
appears when you press any key after locking the key-
pad.
PSR295OM.p65
2004/07/06, 15:37
Page 33
Adobe PageMaker 6.5J/Win