34
To turn off the key lock, press and hold
KEY
about 3 sec-
onds. The scanner beeps three times and
Key unlocked.
appears.
Changing the Display Contrast
1. Press
MANUAL
.
2. Press
FUNC
then
9
.
Use Up/Down keys to set contrast,
Enter key saves.
appears.
3. Press
/\
or
\/
to select the contrast.
4. Press
ENTER
to set the display contrast.
Cloning the Programmed Data
You can transfer the programmed data to and from an-
other PSR-295 scanner using an optional connecting
cable with 3.5mm phone plugs on both ends (not sup-
plied).
Note:
** CLONE MODE ** Incorrect Model!
appears if
the scanner receives data from another scanner other
than a PSR-295.
Follow these steps to clone the data.
1. Turn on both scanners.
2. Connect the connecting cable to each scanner’s
PC/
IF
jack.
** CLONE MODE ** Press UP to send Remove
cable to exit.
appears.
3. Press
/\
.
Confirm send data? 1 -> YES Press other key
for NO.
appears.
4. Press
1
to send the data to the other unit or press any
other key to cancel the operation.
The scanner sends the data. To exit the clone mode, re-
move the cable.
RESETTING/INITIALIZING THE
SCANNER
If the scanner’s display locks up or does not work prop-
erly after you connect a power source, you might need to
reset or initialize it.
PSR295OM.p65
2004/07/06, 15:37
Page 34
Adobe PageMaker 6.5J/Win