58
OUTSIDE SURFACE
Use mild detergent or baking soda and hot water solution. Non-abrasive scouring powder can be used on
stubborn stains, then rinse with water.
If the inside surface of the barbecue lid has the appearance of peeling paint, baked on grease build-up has
turned to carbon and is flaking off. Clean thoroughly with strong hot soapy water solution. Rinse with
water and allow to completely dry.
NEVER USE OVEN CLEANER.
Interior of Barbecue bottom
Remove residue using brush, scraper and/or cleaning pad then wash with a soapy water solution. Rinse
with water and allow to dry.
Cooking Grid
Use a mild soapy water solution. Non-abrasive scouring power can be used on stubborn stains then rinse
with water.
SERVICING & SPARE PARTS
Your gas barbecue should be serviced annually by a competent registered person.
Summary of Contents for GR-3C41A
